Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST3 Pro on a 4K monitor
#12
Thanks Greg,

My old monitor had 1680 x 1050 resolution & it worked fine with the new RTX 2070 video card at that resolution. The scaling factor was 100%. It's the 4K monitor that's causing the issues. At 4K the old screen just appears in the top left quadrant of the display & is too tiny to read. With the scale factor set to 100% ST3 Pro displays a nice sky simulation, but the info at the top & bottom are too small, like the screenshot that I posted earlier.

What version of the Nvidia drivers are you using? I'll contact EVGA with this issue.

Thanks again,

Phil S.
Reply


Messages In This Thread
ST3 Pro on a 4K monitor - by PMSchu - 2019-04-18, 03:06 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-04-18, 03:24 PM
RE: ST3 Pro on a 4K monitor - by obrazell - 2019-04-18, 03:25 PM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-04-19, 02:39 AM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-05-04, 10:29 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-05, 06:21 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-05, 06:17 PM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-05-05, 10:47 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-06, 01:42 AM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-05-06, 03:49 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-06, 04:15 PM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-05-07, 12:30 AM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-07, 12:41 AM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-07, 12:43 AM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-05-07, 04:30 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-07, 04:38 PM
RE: ST3 Pro on a 4K monitor - by gdjsky01 - 2019-10-27, 01:41 AM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-10-31, 12:29 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)