Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST3 Pro on a 4K monitor
#8
Hi Greg,

As you can see in the attachment to my 5/4/19 post, the actual sky simulation for the 100% scale factor is just fine, as you predicted. It's the additional info at the top & bottom of the chart that's too small to read. I'm using Nvidia driver v. 430.39 on an EVGA RTX 2070 graphics card at 3840 x 2160 resolution, the monitor's native resolution.

Here's a screenshot that shows the 2 different scalings for the star field and for the overlay info. The stars & their designations look fine. The overlay info like the eyepiece & finder circles, the constellation lines & the horizon line on the naked eye section of the chart are shifted ~45° to the upper left, occupying the top left quadrant of each of their respective sections of the chart. The icons & hypertext at the top & bottom of the chart also look fine. The telescope simulation is pretty unusable when the stars don't line up with the other symbols like the galaxies, eyepiece circle, etc.

Phil S.


Attached Files Thumbnail(s)
   
Reply


Messages In This Thread
ST3 Pro on a 4K monitor - by PMSchu - 2019-04-18, 03:06 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-04-18, 03:24 PM
RE: ST3 Pro on a 4K monitor - by obrazell - 2019-04-18, 03:25 PM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-04-19, 02:39 AM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-05-04, 10:29 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-05, 06:21 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-05, 06:17 PM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-05-05, 10:47 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-06, 01:42 AM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-05-06, 03:49 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-06, 04:15 PM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-05-07, 12:30 AM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-07, 12:41 AM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-07, 12:43 AM
RE: ST3 Pro on a 4K monitor - by PMSchu - 2019-05-07, 04:30 PM
RE: ST3 Pro on a 4K monitor - by theskyhound - 2019-05-07, 04:38 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)