2023-12-13, 05:35 PM
Hello,
It sounds like your configuration for your Imaging System isn't set up without the rotator. Open your Imaging Systems, select yours, and click the Control System button. This is where you tell it whether or not you have a rotator. Once it is turned off you should no longer be prompted.
Regarding the filter wheel, this one may be a setting in N.I.N.A. rather than SkyTools. I'm not 100% certain. There may be something about the way SkyTools writes the N.I.N.A. sequences that is causing this, but I strongly suspect it is your N.I.N.A. configuration that is at fault.
Have a look at this video:
https://www.youtube.com/watch?v=SobRmiTsyVA
Please let me know what you discover or if you continue to have problems.
It sounds like your configuration for your Imaging System isn't set up without the rotator. Open your Imaging Systems, select yours, and click the Control System button. This is where you tell it whether or not you have a rotator. Once it is turned off you should no longer be prompted.
Regarding the filter wheel, this one may be a setting in N.I.N.A. rather than SkyTools. I'm not 100% certain. There may be something about the way SkyTools writes the N.I.N.A. sequences that is causing this, but I strongly suspect it is your N.I.N.A. configuration that is at fault.
Have a look at this video:
https://www.youtube.com/watch?v=SobRmiTsyVA
Please let me know what you discover or if you continue to have problems.
Clear skies,
Greg
Head Dude at Skyhound
Greg
Head Dude at Skyhound