+- Skyhound Forums (https://skyhound.com/forums)
+-- Forum: How Do I Do It? (https://skyhound.com/forums/forumdisplay.php?fid=59)
+--- Forum: How do I do it in SkyTools 4 Imaging? (https://skyhound.com/forums/forumdisplay.php?fid=61)
+--- Thread: Missing Optolong and IDAS filter data. (/showthread.php?tid=3211)
Missing Optolong and IDAS filter data. - BillT - 2024-12-01
Hello,
I just acquired ST4.1 and I am working my way through the initial setup process. I runned into a problem with the filter set up portion, some of my filters are not listed and I cannot find the txt file with the information. If someone could share then it would be greatly appreciated. I did search the forum as suggested but no luck. I need:
1-Optolong red filter. I found a post for the LRGB txt files but it is missing the red filter.
2-Optolong Radian Triad Ultra Narrowband Filter
3-IDAS NBZ II.
Also Greg mentions in his video "Setting up an Imaging System in SkyTools 4" a future video of how to create your filters. I cannot find it either.
Thanks for your help,
Bill
RE: Missing Optolong and IDAS filter data. - BillT - 2024-12-01
I managed to create the data for the Optolong red, IDAS BNZ II and Optolong Radian Triad Ultra. Files attached.
