+- Skyhound Forums (https://skyhound.com/forums)
+-- Forum: Imaging & Astrophotography (https://skyhound.com/forums/forumdisplay.php?fid=24)
+--- Forum: iTelescope Users Forum (https://skyhound.com/forums/forumdisplay.php?fid=31)
+--- Thread: Position angle of T68's camera (/showthread.php?tid=1262)
Position angle of T68's camera - PMSchu - 2020-02-06
Hi Greg,
I was in contact with Dr. Sasse of iTelescopes & he said that the position angle of T68's camera is 271°. He also mentioned that he now has time available.
Phil S.
RE: Position angle of T68's camera - theskyhound - 2020-02-06
Thanks Phil. Because imaging systems are forever in SkyTools (they may be part of completed projects for instance) I have to give this one a new name. It is "iTelescope T68 (NM)."
RE: Position angle of T68's camera - PMSchu - 2020-02-06
Thanks, Greg. I guess that I need to switch something for the recent imaging run, correct? It used the original T68 data.
Phil S.
RE: Position angle of T68's camera - theskyhound - 2020-02-06
Just make sure you are subscribed to iTelescope updates and then select iTelescope T68 (NM) as your imaging system. Any projects you created are for the imaging system you used when you created the project. I suggest using the new imaging system going forward.