Skyhound Forums
T68 is online - Printable Version

+- Skyhound Forums (https://skyhound.com/forums)
+-- Forum: Imaging & Astrophotography (https://skyhound.com/forums/forumdisplay.php?fid=24)
+--- Forum: iTelescope Users Forum (https://skyhound.com/forums/forumdisplay.php?fid=31)
+--- Thread: T68 is online (/showthread.php?tid=1253)



T68 is online - PMSchu - 2020-02-03

The iTelescope T68 is now operational. It's an 11" f/2.3 RASC with a one-shot color camera.

Phil S.


RE: T68 is online - theskyhound - 2020-02-03

Thanks Phil.


RE: T68 is online - PMSchu - 2020-02-03

I was able to image M81 & M82 with T68 last night. I will post the results when I finish the post-processing. I used ST4i ver 4.0e to create the ACP script.

Phil S.


RE: T68 is online - theskyhound - 2020-02-04

Hi Phil,

As far as I can tell they have not updated much of their information on the web for T68. If you happen to note the position angle of the camera, please let us know. It is nice to have access to a CMOS camera again. I wasn't done testing!


RE: T68 is online - PMSchu - 2020-02-04

The Telescope info from T68 says the Imager Position Angle East: Undefined, West: Undefined. Here's one of the JPEGs:[attachment=1021]

Phil S.


RE: T68 is online - theskyhound - 2020-02-04

I was hoping you could get the PA from the FITS header of one of the images.


RE: T68 is online - theskyhound - 2020-02-04

Focus looks pretty good.


RE: T68 is online - PMSchu - 2020-02-04

I'm having trouble unzipping the image files. The big .zip file unzips fine down to the level of the zipped image files, then I have fits trying to unzip the individual image .zip files Angry Angry . Each image file is ~70MB.

How can I read the FITS header? I've never done that.

Phil S.


RE: T68 is online - theskyhound - 2020-02-04

Nevermind Phil. I can get the info elsewhere.