Skyhound Forums
ST4i screen too big - Printable Version

+- Skyhound Forums (https://skyhound.com/forums)
+-- Forum: SkyTools Support (https://skyhound.com/forums/forumdisplay.php?fid=20)
+--- Forum: SkyTools 4 Support (https://skyhound.com/forums/forumdisplay.php?fid=46)
+--- Thread: ST4i screen too big (/showthread.php?tid=480)



ST4i screen too big - gregwjones - 2019-03-18

While trying to setup a new imaging system to a new install of ST4i on a laptop I ran into this problem.

When I tried to add a new camera, the Edit Camera Data window was too large for my display so that I could not see the bottom row of buttons to complete the edits. A screenshot is attached. I could not drag the Edit Camera Data window up far enough to see the bottom row of buttons. Also, I could not resize the Edit Camera Data window.

I had ST4i in fullscreen mode and the Windows Task Bar was hidden at the bottom of the screen. My screen size is 1920 x 1080.

I had to kill ST4i is order to continue doing anything else.

Please look into this.

Regards,
Greg Jones


RE: ST4i screen too big - theskyhound - 2019-03-18

Hello,

I am about to release an an update that makes this dialog shorter. But it should already fit on a screen that is 1080 pixels high. Please check to see if your screen and text items have been enlarged, which also increases the size of the dialog.


RE: ST4i screen too big - gregwjones - 2019-03-18

Yes, the Scale and Layout is set to 150% in the Display Setting window. My eyes are getting old...
I am running Windows 10.