Skyhound Forums
Observing List question - Printable Version

+- Skyhound Forums (https://skyhound.com/forums)
+-- Forum: SkyTools Discussion (https://skyhound.com/forums/forumdisplay.php?fid=5)
+--- Forum: SkyTools 3 (https://skyhound.com/forums/forumdisplay.php?fid=11)
+---- Forum: SkyTools 3 General Discussion (https://skyhound.com/forums/forumdisplay.php?fid=8)
+---- Thread: Observing List question (/showthread.php?tid=478)



Observing List question - gcisko - 2019-03-15

I have had Sky Tools 3 for a few years and I simply am unable to figure out the following. I create a Showpieces Observing List for today. They show up in "simple mode" but not in "observing mode". When I select "observing mode" I get "0 objects out of 17 meet visibility criteria". I have all the observing filters pretty wide open (all classes, all constellations, above horizon, Twilight/Moonlight ok, Ignore Difficulty. 

Thanks,
Greg


RE: Observing List question - theskyhound - 2019-03-15

Hello,

I think you mean Visual mode? There are some hidden filters that can be inadvertently set. To be certain that all of the filters are reset, select "Reset Filters" from the Observing List menu. If you still don't see anything let me know.

BTW see my editorial here: https://skyhound.com/forums/showthread.php?tid=471


RE: Observing List question - gcisko - 2019-03-15

(2019-03-15, 10:14 PM)theskyhound Wrote: Hello,

I think you mean Visual mode? There are some hidden filters that can be inadvertently set. To be certain that all of the filters are reset, select "Reset Filters" from the Observing List menu. If you still don't see anything let me know.

BTW see my editorial here: https://skyhound.com/forums/showthread.php?tid=471

Yes I meant Visual mode (the eyepiece icon). "Reset Filters" fixed my issue thanks!