Skyhound Forums
Importing Observing List - question - Printable Version

+- Skyhound Forums (https://skyhound.com/forums)
+-- Forum: SkyTools Discussion (https://skyhound.com/forums/forumdisplay.php?fid=5)
+--- Forum: SkyTools 3 (https://skyhound.com/forums/forumdisplay.php?fid=11)
+---- Forum: SkyTools 3 General Discussion (https://skyhound.com/forums/forumdisplay.php?fid=8)
+---- Thread: Importing Observing List - question (/showthread.php?tid=459)



Importing Observing List - question - dw_Skyhound - 2019-01-26

Hi all,
I've imported a couple of observing lists.
The data manager is showing them with red check marks which is supposed to represent them as now available data.
But I don't see them in the available observing lists in the nightly planner - or anywhere else.

Any suggestion as to where in the system I can actually find them to use them?
I've looked around in the help files without finding the answer to this question.

Thanks


RE: Importing Observing List - question - obrazell - 2019-01-26

Check what Group you have imported them into and then select that group in the Nightly Planner and they should be there. I am guessing it will import to the default group but not always. Then on the Nightly Planner select that group and you should see the imported observing lists.

Owen


RE: Importing Observing List - question - dw_Skyhound - 2019-01-26

(2019-01-26, 06:17 PM)obrazell Wrote: Check what Group you have imported them into and then select that group in the Nightly Planner and they should be there. I am guessing it will import to the default group but not always. Then on the Nightly Planner select that group and you should see the imported observing lists.

Owen

Duh!
I should have seen that!
It says right there on the interface "Import Observing List to this group".

I assumed the list was already in its own unique group.

Thanks!