Skyhound Forums
SkyTools .stx file attachments now supported - Printable Version

+- Skyhound Forums (https://skyhound.com/forums)
+-- Forum: SkyTools Discussion (https://skyhound.com/forums/forumdisplay.php?fid=5)
+--- Forum: SkyTools 4 (https://skyhound.com/forums/forumdisplay.php?fid=9)
+---- Forum: SkyTools 4 Imaging (https://skyhound.com/forums/forumdisplay.php?fid=7)
+---- Thread: SkyTools .stx file attachments now supported (/showthread.php?tid=437)



SkyTools .stx file attachments now supported - theskyhound - 2018-12-30

I have added support for SkyTools Export format files (.stx) to this forum. Please note that while SkyTools 4 can read most SkyTools 3 stx files, the reverse is not true.

As a test I have attached the Permian observing list consisting of the brighter galaxies with look back times to approximately the Permian period of earth history. 

To read this file into ST4: 

1. Save the attachment to your computer

2. Start SkyTools 4 and select the Target Selection tool

3. Press "Get Target Lists" and select "Read from SkyTools .stx file"

4. Browse to the folder where you saved Permian.stx and select the file

5. Click Import

Open the list in the Target Selection tool by selecting the Permian list


RE: SkyTools .stx file attachments now supported - PMSchu - 2019-01-01

Hi Greg,

I was able to successfully download & import the permian.stx file. It opened with no problems as a Target List. What is the effect of several hundred million years in the life of a galaxy? Are the galaxies supposed to look different or brighter? Would they exhibit some proper motion in that time? I tried to place a Skymark to see if I could detect a position shift, but didn't see one for NGC 682.

Anyway the .stx file test was successful, thanks.

Have a Happy New Year!

Phil S.


RE: SkyTools .stx file attachments now supported - tcchittyjr - 2019-02-10

(2018-12-30, 11:46 PM)theskyhound Wrote: I have added support for SkyTools Export format files (.stx) to this forum. Please note that while SkyTools 4 can read most SkyTools 3 stx files, the reverse is not true.

As a test I have attached the Permian observing list consisting of the brighter galaxies with look back times to approximately the Permian period of earth history. 

To read this file into ST4: 

1. Save the attachment to your computer

2. Start SkyTools 4 and select the Target Selection tool

3. Press "Get Target Lists" and select "Read from SkyTools .stx file"

4. Browse to the folder where you saved Permian.stx and select the file

5. Click Import

Open the list in the Target Selection tool by selecting the Permian list
When I select Target Selection Tool, I don't have a 'Get Target Lists' option. Running 4.0c  Suggestions?

TomC


RE: SkyTools .stx file attachments now supported - theskyhound - 2019-02-10

(2019-02-10, 09:45 PM)tcchittyjr Wrote:
(2018-12-30, 11:46 PM)theskyhound Wrote: I have added support for SkyTools Export format files (.stx) to this forum. Please note that while SkyTools 4 can read most SkyTools 3 stx files, the reverse is not true.

As a test I have attached the Permian observing list consisting of the brighter galaxies with look back times to approximately the Permian period of earth history. 

To read this file into ST4: 

1. Save the attachment to your computer

2. Start SkyTools 4 and select the Target Selection tool

3. Press "Get Target Lists" and select "Read from SkyTools .stx file"

4. Browse to the folder where you saved Permian.stx and select the file

5. Click Import

Open the list in the Target Selection tool by selecting the Permian list
When I select Target Selection Tool, I don't have a 'Get Target Lists' option. Running 4.0c  Suggestions?

TomC

Look for it just above the observing list columns. There will be a series of controls and menu buttons, starting with "List Functions" on the left. It is the fourth one over. If for some reason it really isn't there please upload aa screen capture so that I can better understand what is going on.


RE: SkyTools .stx file attachments now supported - tcchittyjr - 2019-02-10

(2019-02-10, 09:51 PM)theskyhound Wrote:
(2019-02-10, 09:45 PM)tcchittyjr Wrote:
(2018-12-30, 11:46 PM)theskyhound Wrote: I have added support for SkyTools Export format files (.stx) to this forum. Please note that while SkyTools 4 can read most SkyTools 3 stx files, the reverse is not true.

As a test I have attached the Permian observing list consisting of the brighter galaxies with look back times to approximately the Permian period of earth history. 

To read this file into ST4: 

1. Save the attachment to your computer

2. Start SkyTools 4 and select the Target Selection tool

3. Press "Get Target Lists" and select "Read from SkyTools .stx file"

4. Browse to the folder where you saved Permian.stx and select the file

5. Click Import

Open the list in the Target Selection tool by selecting the Permian list
When I select Target Selection Tool, I don't have a 'Get Target Lists' option. Running 4.0c  Suggestions?

TomC

Look for it just above the observing list columns. There will be a series of controls and menu buttons, starting with "List Functions" on the left. It is the fourth one over. If for some reason it really isn't there please upload aa screen capture so that I can better understand what is going on.

I see it now. So sorry for the confusion on my part. I'm working with ST4 Imaging now to get ready for my dark sky sight. Great software!

TomC


RE: SkyTools .stx file attachments now supported - TerryLewis - 2019-02-22

Hi Greg,

I have old SkyTools 3 stx files. How can I read them in SkyTools 4? I have recently upgraded the version to the latest and need to continue working on some projects (getting back to the drafts basically). Should I perhaps convert them somehow?

Thanks.


RE: SkyTools .stx file attachments now supported - theskyhound - 2019-03-02

(2019-02-22, 06:37 AM)TerryLewis Wrote: Hi Greg,

I have old SkyTools 3 stx files. How can I read them in SkyTools 4? I have recently upgraded the version to the latest and need to continue working on some projects (getting back to the drafts basically). Should I perhaps convert them somehow?

Thanks.

Hi Terry,

See the first post in this thread for the instructions for how to read SkyTools 3 .stx files. Just substitute your .stx files for the one in the example.