Skyhound Forums
OTA dialog Box restriction issue - Printable Version

+- Skyhound Forums (https://skyhound.com/forums)
+-- Forum: SkyTools Support (https://skyhound.com/forums/forumdisplay.php?fid=20)
+--- Forum: SkyTools 4 Support (https://skyhound.com/forums/forumdisplay.php?fid=46)
+--- Thread: OTA dialog Box restriction issue (/showthread.php?tid=318)



OTA dialog Box restriction issue - yruinaq - 2018-09-19

Trying to set up sky Tools 4.

I have found that i can only enter a maximun of 4 OTAs in my OTAs dialog box which is accessed from the Telescope Optical Tube Assembly dialog box.

Is this correct?

Any help will be appreciated


RE: OTA dialog Box restriction issue - theskyhound - 2018-09-19

Hi,

There is no limit to the number of OTAs that can be added. Normally, you enter a single OTA while setting up a single Imaging System. Once the Imaging System is saved, the OTA is added to the "My OTA" listing automatically. Does that help?


RE: OTA dialog Box restriction issue - yruinaq - 2018-09-21

Thanks Greg
All is clear. I now see where i was going wrong